California Instruments 801RP Series Manual de usuario Pagina 48
- Pagina / 223
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
AMETEK Programmable Power MX / RS Series SCPI Programming Manual
48 MX / RS Series
4.2.8 Output - DC Voltage
CALibrate[:SOURce]:VOLTage:DC:LRANge[:FSCale]<NRf+>
This command will result in the calibration coefficent being calculated for the DC full-scale
output voltage in the low voltage range.
Command Syntax CALibrate:VOLTage:DC:LRANge <NRf+>
Parameters <NRf> (programmed output voltage)
Examples CAL:VOLT:DC:LRAN -2
Query Syntax CALibrate:VOLTage:DC:LRANge?
Returned Parameters <NRf> (cal coefficient value between 0.9 and 1.1)
Related Commands CAL:VOLT:DC:LRAN:NEG
CALibrate[:SOURce]:VOLTage:DC:LRANge:ZERO <NRf+>
This command will set the calibration coefficent for the dc output voltage offset at the low
voltage range.
Command Syntax CALibrate:VOLTage:DC:LRANge:ZERO <NRf+>
Parameters <NRf> (a value between -127 and +128)
Examples CAL:VOLT:DC:LRAN:ZERO +10
Query Syntax CALibrate:VOLTage:DC:LRANge:ZERO?
Returned Parameters <NR1> (value range -127 to +128)
Related Commands CAL:VOLT:DC:LRAN:ZERO
CALibrate[:SOURce]:VOLTage:DC:HRANge[:FSCale]<NRf+>
This command will result in the calibration coefficent being calculated for the DC full scale
output voltage in the high voltage range.
Command Syntax CALibrate:VOLTage:DC:HRANge <NRf+>
Parameters <NRf> (programmed output voltage)
Examples CAL:VOLT:DC:HRAN -2
Query Syntax CALibrate:VOLTage:DCHRANge?
Returned Parameters <NRf> (cal coefficient value between 0.9 and 1.1)
Related Commands CAL:VOLT:DC:LRAN:ZERO
CALibrate[:SOURce]:VOLTage:DC:HRANge:ZERO <NRf+>
This command will set the calibration coefficent for the dc output voltage offset at the high
voltage range.
Command Syntax CALibrate:VOLTage:DC:HRANge:ZERO <NRf+>
Parameters <NRf> (a value between -127 and +128)
Examples CAL:VOLT:DC:HRAN:ZERO +10
Query Syntax CALibrate:VOLTage:DC:HRANge:ZERO?
Returned Parameters <NR1> (value range -127 to +128)
Related Commands CAL:VOLT:DC:LRAN
- MX / RS Series 1
- SCPI Programming Manual 1
- 2 MX / RS Series 2
- MX / RS Series 5 5
- SAFETY SYMBOLS 5
- Warranty Period: 1 Year 6
- WARRANTY TERMS 6
- PRODUCT RETURN PROCEDURE 6
- Table of Contents 7
- MX / RS Series 9 9
- Introduction 10
- External References 11
- Introduction to Programming 11
- Introduction to SCPI 13
- Types of SCPI Messages 14
- The SCPI Command Tree 14
- Using Queries 16
- Structure of a SCPI Message 16
- The Message Unit 16
- Combining Message Units 17
- Headers 18
- Query Indicator 18
- Message Unit Separator 18
- Root Specifier 19
- Message Terminator 19
- SCPI Data Formats 20
- Numerical Data Formats 20
- Character Data 20
- GPIB Controllers 21
- Agilent 82350 Driver 21
- RS232C Interface 23
- Serial Cable Diagram 24
- USB Interface 25
- USB Driver Installation 25
- MX / RS Series 31 31
- USB Interface Use 33
- LAN Interface Option 34
- MAC Address 34
- Setting the TCP/IP Address 34
- Socket Port Number 36
- IP Ping 36
- SCPI Command Reference 37
- Calibration Subsystem 38
- [:SOURce] 39
- :HRANge 39
- :IMPedance 39
- Password 40
- Current Measurement 41
- Voltage Measurement 43
- Output Phase 45
- Output - AC Voltage 46
- Output - DC Voltage 48
- Display Subsystem 50
- Instrument Subsystem 52
- Current Array Data 55
- 58 MX / RS Series 58
- Voltage Array Data 59
- Phase Measurement Subsystem 66
- Power Measurement Subsystem 67
- Output Subsystem 72
- Output Relay 72
- Output Protection 73
- Output Remote Inhibit Modes 73
- External Trigger Output 75
- Source Subsystem - Current 78
- Source Subsystem - Frequency 80
- Source Subsystem - Limit 85
- Source Subsystem - List 89
- List - Count 90
- List - Dwell 90
- List - Frequency 91
- List - Repeat 93
- List - Step 93
- List:TTL Trigger Out 94
- List:Voltage 95
- Source Subsystem - Mode 97
- Source Subsystem - Phase 98
- Source Subsystem - PONSetup 99
- Source Subsystem - Pulse 103
- Source Subsystem - Voltage 106
- Status Subsystem Commands 111
- System Commands 115
- Trigger Subsystem 123
- Common Commands 128
- 5.1 *CLS 129
- 5.2 *ESE 130
- 5.3 *ESR? 130
- 5.4 *IDN? 131
- 5.5 *OPC 131
- 5.6 *OPT? 132
- 5.7 *PSC 133
- 5.8 *RCL 133
- 5.9 *RST 134
- 5.10 *SAV 135
- 5.11 *SRE 135
- 5.12 *STB? 136
- 5.13 *TRG 137
- 5.14 *WAI 137
- Programming Examples 138
- Programming the Output 139
- Power-on Initialization 139
- Enabling the Output 139
- AC Voltage and Frequency 139
- Programming the Output Phase 141
- Current Limit 141
- Waveform Shapes 142
- Individual Phases 143
- Coupled Commands 144
- FIXED mode 146
- STEP mode 146
- PULSE mode 146
- LIST mode 146
- Step and Pulse Transients 147
- List Transients 148
- Triggering Output Changes 150
- Trigger System Model 150
- Generating Triggers 152
- Acquiring Measurement Data 153
- Power Measurements 154
- Frequency Measurements 154
- Harmonic Measurements 155
- Triggering Measurements 156
- TRIGGER RECEIVED 157
- INIT[:IMM]:ACQ 157
- 4096 DATA POINTS 160
- Trigger System Summary 161
- Status Registers 162
- Questionable Status Group 165
- Standard Event Status Group 166
- Status Byte Register 166
- Examples 167
- SCPI Command Completion 168
- Option Commands 169
- IEC 1000-4-11 (-411) 170
- IEC 1000-4-13 (-413) 174
- IEC 1000-4-13 Subsystem 174
- Interharmonics Subsystem 185
- RTCA/DO-160D (-160) 187
- VOLTAGE SURGE, for detail 189
- VOLTAGE UNDER 189
- MIL-STD 704E (-704) 194
- AC System 194
- DC System 195
- Programming Considerations 195
- OMNI Reference Impedance 197
- Watt Hour Meter (-WHM) 198
- Current Sink Option (-SNK) 199
- 202 MX / RS Series 202
- MX / RS Series 209 209
- SCPI Version 209
- Appendix C: Error Messages 210
- MX / RS Series 211 211
- 212 MX / RS Series 212
- MX / RS Series 213 213
- 214 MX / RS Series 214
- MX / RS Series 215 215
- Table 8-4 : Error Messages 215
Relacionado con productos y manuales para De medición, control y control California Instruments 801RP Series
(8 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.092 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales