California Instruments 2253iX Manual de instrucciones descargar pdf (Pagina 11)

Programming Manual Compact i / iX Series

AMETEK Programmable Power Division 11

This manual contains sections on programming the compact iX or i Series over the bus. The iX

Series is equipped with GPIB and USB interfaces. The i Series is equipped with a USB interface.

An optional GPIB interface can be specified at the time of order. Refer to the i/iX Series User

manual for information on using the remote control interface and command syntax. The user

manuals (P/N 6005-960 for 751/1501i/iX and P/N 6005-962 for 2253i/iX) are provided on the

same CDROM as this programming manual.

AMETEK Programmable Power may make updated versions of these manuals available from

time to time in electronic format through it’s website. To obtain an updated manual revision if

available, check the AMETEK Programmable Power Manual download page at

www.programmablepower.com

. You need to register as a customer to obtain free access to

manual and software downloads.

1.4 Introduction to Programming

This section provides some general information regarding programming instrumentation and

available interface types.

1.4.1 IEEE-488 Capabilities of the AC source

All AC source functions except for setting the IEEE-488 address are programmable over the

IEEE-488. The IEEE 488.2 capabilities of the AC source are listed in Chapter 2 of the User's

Manual. The iX Series offers standard IEEE-488 interface. The i Series requires the –GPIB

option.

The AC source operates from an IEEE-488 address that is set from the front panel. To set the

IEEE-488 address, press the MENU key on the front panel repeatedly until the

CONFIGURATION entry is shown on the LCD display.

Move the indicator on the right hand side of the display to point to CONFIGURATION and press

the ENTER key.

This will display the IEEE ADRRESS currently set. To change the address, use the Voltage knob

to increment or decrement the value. Press the ENTER key to confirm your selection.

To set up the GPIB/IEEE-488 interface on a Windows XP PC, refer to section 3.1, “IEEE-488 /

GPIB Interfac

e”.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 215 216

Sin comentarios

California Instruments 2253iX Manual de instrucciones Pagina 11