California Instruments 2253iX Manual de instrucciones descargar pdf (Pagina 165)

Programming Manual Compact i / iX Series

AMETEK Programmable Power Division 165

DO160:NORMal:VOLTage:INTerrupt

This command will cause output voltage interruption. There are 15 different levels of interruption.

Refer to Figure 8-6 in the User Manual for characteristics of each level. Test numbers 16 and 17

for all equipment that does not incorporate digital circuit. Test numbers 21 to 26 correspond to

Standard I through VI for EUROCAE and RTCA2. See Figure 8-7 in User manual.

Command Syntax DO160:NORMal:VOLTage:INTerrupt <NRf>

Parameters <test number>

Examples DO160:NORM:VOLT:INT 4

Query Syntax DO160:NORM:VOLT:INT?

Returned Parameters <NR1>

DO160:NORMal:VOLTage:SURGe

This command will generate the voltage levels required to generate a normal voltage source.

Refer to Section 8.1.4.1, under the heading titled

VOLTAGE SURGE, for details.

Command Syntax DO160:NORMal:VOLTage:SURGe

Parameters none

Examples DO160:NORM:VOLT:SURG

Query Syntax none

DO160:NORMal:FREQuency:MODulation

This command will cause output frequency modulation. The level of modulation is the function of

the rate of modulation. Refer to Figure 8-5 in the User Manual. The command parameter is the

rate of modulation in Hz.

Command Syntax DO160:NORMal:FREQuency:MODulation <NRf>

Parameters <frequency>

Examples DO160:NORM:FREQ:MOD 0.1

Query Syntax DO160:NORM:FREQ:MOD?

Returned Parameters <NR2>

DO160:NORMal:FREQuency:TRANsient

This command applies to Group 1 only for the the Eurocae standard. Refer to Table 8-5 in the

User Manual.

Command Syntax DO160:NORMal:FREQuency:TRANsient

Parameters none

Examples DO160:NORM:FREQ:TRAN

Query Syntax none

Returned Parameters none

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 215 216

Sin comentarios

California Instruments 2253iX Manual de instrucciones Pagina 165