California Instruments 2253iX Manual de instrucciones Pagina 36

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 216
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 35
Programming Manual Compact i / iX Series
AMETEK Programmable Power Division 36
Command Syntax CALibrate:MEASure:VOLTage
Parameters None
Query Syntax CALibrate:MEASure:CURRent?
Returned Parameters <NR3>
Examples CAL:MEAS:VOLT
Related Commands CAL:SAVE CAL:MEAS:CURR
CALibrate:PASSword
This command can only be used to unlock the calibration mode. Once unlocked, non-query
calibration commands will be accepted. Query commands are always accepted.
Command Syntax CALibrate:PASSword<NRf>
Parameters <high voltage range> (default)
Examples CAL:PASS 300
Related Commands none
CALibrate:SAVE
This command can only be used in calibration mode. It saves any new calibration constants (after
a current or voltage calibration procedure has been completed) in nonvolatile memory.
Command Syntax: CALibrate:SAVE
Parameters None
Examples CAL:SAVE
Related Commands CAL:CURR CAL:VOLT
CALibrate[:SOURce]:PHASe
Phase Selectable
This command can be used to set the phase calibration coefficient. Use the INST:SEL or
INST:NSEL to select the desired phase. This allows the phase for voltage 2 and 3 (B and C) to
be adjusted with respect to phase A. The query format returns the actual calibration coefficient
Command Syntax CALibrate[:SOURce]:PHASe
Parameters <NRf+>
Query Syntax CALibrate[:SOURce]:PHASe?
Returned Parameters <NR3>
Examples CAL:PHAS 1.3
Related Commands none
CALibrate[:SOURce]:VOLTage
Phase Selectable
This command can be used to query the output voltage calibration coefficient. Only the query
format is available. Use the INST:SEL or INST:NSEL to select the desired phase.
Command Syntax CALibrate[:SOURce]:VOLTage
Parameters None
Query Syntax CALibrate[:SOURce]:VOLTage?
Returned Parameters <NR3>
Examples CAL:VOLT?
Related Commands none
Vista de pagina 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 215 216

Comentarios a estos manuales

Sin comentarios