California Instruments 2253iX Manual de instrucciones descargar pdf (Pagina 93)

Programming Manual Compact i / iX Series

AMETEK Programmable Power Division 93

VOLTage:SLEW:MODE

Phase Selectable

This command determines how the output voltage slew rate is controlled during a triggered

output transient. The choices are:

FIXed The slew rate is unaffected by a triggered output transient.

STEP The slew rate is programmed to the value set by

VOLTage:SLEW:TRIGgered when a triggered transient occurs.

PULSe The slew rate is changed to the value set by

VOLTage:SLEW:TRIGgered for a duration determined by the pulse

commands.

LIST The slew rate is controlled by the voltage slew list when a triggered

transient occurs.

Command Syntax [SOURce:]VOLTage:SLEW:MODE<mode>

Parameters FIXed | STEP | PULSe | LIST

*RST Value FIX

Examples VOLT:SLEW:MODE LIST VOLT:SLEW:MODE FIX

Query Syntax [SOURce:]VOLTage:SLEW:MODE?

Returned Parameters <CRD>

Related Commands VOLT:SLEW:TRG VOLT:SLEW

VOLTage:SLEW:TRIGgered

Phase Selectable

This command selects the slew rate that will be set during a triggered step or pulse transient. A

parameter of MAXimum or INFinity will set the slew to its maximum possible rate. The SCPI

representation for infinity is 9.9E37.

Command Syntax [SOURce:]VOLTage:SLEW:TRIGgered<NRf+>|INFinity

Parameters 1E-3 to 9.9E37 | INFinity |MINimum | MAXimum

Unit V/S (volts per second)

*RST Value INFinity

Examples VOLT:SLEW:TRIG 1 VOLT:SLEW:TRIG MAX

VOLT:SLEW:TRIG INF

Query Syntax [SOURce:]VOLTage:SLEW:TRIGgered?

Returned Parameters <NR3>

Related Commands VOLT:SLEW:MODE VOLT:SLEW

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 215 216

Sin comentarios

California Instruments 2253iX Manual de instrucciones Pagina 93